Overture 3D
Overture Nylon Filament 1.75mm
Couldn't load pickup availability
INTRODUCTION
Abrasion of the brass nozzle happens quite often when printing CoPA material. A wear-resistant nozzle, such as hardened steel and ruby nozzle, is highly recommended.
If this nylon material is used as the support material for itself, please remove the support structure before excessive moisture absorption. Otherwise the support structure can be permanently bonded to the model.
After the printing process, it is recommended to anneal the model in the oven at 70°C for 2 hours.
SPECIFICATIONS
Recommended Extrusion/Nozzle Temp: 250°C - 270°C (4 82℉~518℉)
Heated Bed Temp: 25°C - 50°C (77 ℉~ 122℉)
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Filaments Net Weight: 1 kg (2.2 lbs)
Recommended Printing Conditions: Cooling Fan: Off
Printing Speed: 30~50(mm/s)
Raft Separation Distance: 0.1~0.2(mm)
Retraction Distance: 3~6 mm
Packaging Included:
1 × spool of Nylon filament
Shipping
Shipping
Free Shipping Over 40$
Filaments Diameter
Filaments Diameter
1.75 mm +/- 0.03mm
Care Instructions
Care Instructions
Keep In Dry



