INTRODUCTION

【Clog Free & Bubble Free】Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PETG. Complete drying for 24 hours before packaging and vacuum sealed
【Less Tangle & Less Hassle】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother，Overture PETG filament is prepared to bring you high quality 3D Printing experience
【Wide Compatibility and Color Selection】Overture Filaments are reliable for most common 3D printers.Constantly creating beautiful and creative colors with innovation aimed,making your 3D printing easy and amusing, and making creation no longer difficult.
【Dimensional Accuracy & Consistency】 -- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PETG filaments of 1.75 mm diameter, dimensional accuracy 99% Probability + / - 0.02 mm; 2 kg spool (4.4lbs)
【Advanced Quality & High Property】
Overture PETG Filament Combines the advantages of PLA and ABS. The prints are firm and sturdy, high toughness and good mechanical properties as ABS, also easy to print as PLA.

SPECIFICATIONS

• Young’s modulus (X-Y) 1472 ± 270 (MPa)
• Tensile strength (X-Y) 31.9 ± 1.1 (MPa)
• Elongation at break (X-Y) 6.8 ± 0.9 (%)
• Bending modulus 1174 ± 64 (MPa)
• Bending strength 53.7 ± 2.4 (MPa)
• Charpy impact strength 5.1 ± 0.3 (kJ/m2)

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

• Clog-free & Bubble-Free Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result
• Less- tangle and Easy to Use Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother
• Dimensional Accuracy & Consistency  advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .05 mm; 1 kg spool (2.2lbs)
• Cost-effective and Wide Compatibility With over 8 years 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more

INTRODUCTION

1. Superior Quality: Our PETG Filament is made from high-quality materials and is manufactured to strict quality standards, ensuring consistent performance and excellent print quality.

2. High Strength and Durability: PETG Filament is known for its high strength and durability, making it ideal for a wide range of applications.

3. Low Shrinkage: Our PETG Filament has low shrinkage, which helps to reduce warping and improve the accuracy and consistency of your prints.

4. High Compatibility: Our PETG Filament is compatible with a wide range of 3D printers, making it easy to use and highly versatile.

5. Wide Range of Colors: Our PETG Filament comes in a wide range of vibrant colors, allowing you to create stunning and unique prints that stand out from the crowd.

SPECIFICATIONS

• Young’s modulus (X-Y) 1472 ± 270 (MPa)
• Tensile strength (X-Y) 31.9 ± 1.1 (MPa)
• Elongation at break (X-Y) 6.8 ± 0.9 (%)
• Bending modulus 1174 ± 64 (MPa)
• Bending strength 53.7 ± 2.4 (MPa)
• Charpy impact strength 5.1 ± 0.3 (kJ/m2)

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

INTRODUCTION

PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little "shine" or "spark" to it.

• 【Clog-Free & Bubble-Free】Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag
• 【Less-tangle and Easy to Use】Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
• 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy 99% Probability +/- 0.03mm; 1 kg spool (2.2lbs)
• 【Cost-effective and Wide Compatibility】With over 8 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
• 【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier

IMPORTANT REMINDER:

• We recommend using a 0.6mm nozzle if you experience clogging issues with Rock Textured Filaments. Rest assured, occurrences of this issue are becoming increasingly rare as we continue to enhance our product quality and refine the color masterbatch for the rock texture.
• When printing with abrasive filaments such as Nylon, Carbon Fiber-reinforced, or Rock PLA, it's better to upgrade to a hardened steel nozzle, as these materials can cause rapid wear on standard brass nozzle. A hardened steel nozzle will offer better resistance to abrasion, ensuring consistent print quality and prolonging the lifespan of your nozzle. 

• Easy going for new starters.Upgraded formular make the print is more easier and less print action needed. With consistency and pure quality,Easy PLA can be used on various mainsteam printers,give you less inconvenience and less? hassle.It's easy for new starters to print with basic settings.
• Less-tangle and Precision Winding .Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
• Dimensional Accuracy & Consistency .advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• Cost-effective and Wide Compatibility.With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
• LIFE-TIME GUARANTEE .No matter when or why you need to replace or refund we will help!Overture, are your reliable 3d filaments /accessories friends who provides high quality product and serivce when you need it .With over10 years R & D experience,innovation and production, being the best is our life-time goal.

Specification:

• Density : 1.16 - 1.25 (g/cm3 at 21.5˚C)
• Tensile strength (X-Y) : 46.6 ± 0.9 (MPa)
• Tensile strength (Z) : 43.5 ± 3.1 (MPa)
• Elongation at break (X-Y) : 1.9 ± 0.2 (%)
• Bending modulus : 3283 ± 132 (MPa)
• Bending strength : 85.1 ± 2.9 (MPa)
• Charpy impact strength : 2.7 ± 0.2 (kJ/m2)
• Young’s modulus (X-Y)：2636 ± 330 (MPa)

IMPORTANT REMINDER:

• We recommend using a 0.6mm nozzle if you experience clogging issues with Rock Textured Filaments. Rest assured, occurrences of this issue are becoming increasingly rare as we continue to enhance our product quality and refine the color masterbatch for the rock texture.
  
• When printing with abrasive filaments such as Nylon, Carbon Fiber-reinforced, or Rock PLA, it's better to upgrade to a hardened steel nozzle, as these materials can cause rapid wear on standard brass nozzle. A hardened steel nozzle will offer better resistance to abrasion, ensuring consistent print quality and prolonging the lifespan of your nozzle. 

• [Odorless &Zero Warping]-- This CoPA filament combines excellent strength, toughness, and heat resistance of up to 180˚C. It delivers excellent printing quality with no Order or warpage during printing. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the Easy Nylon filament from moisture. As the Easy Nylon material is sensitive to moisture, please remember to put it back into a transparent bag.
• [High Stability and Durability] Our OVERTURE Easy Nylon Roll is based on a copolymer of Nylon 6 and Nylon 6.6, a strong and tough thermoplastic polymer. Great for creating parts which needs to be strong and durable. These Easy Nylon filaments are excellent choice for engineering production or prototyping. PVA glue is always required for better adhesion
• [More Humanized Design & Easy to Use] -- Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
• [Dimensional Accuracy & Consistency] -- advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these synthetic polymers of 1.75 mm diameter, Dimensional Accuracy 99% Probability +/- 0.03mm; 1 kg/ spool (2.2lbs)
• [Cost-effective and Wide Compatibility]-- With over 9 years’ 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge, QIDI and more

IMPORTANT REMINDER:
When printing with abrasive filaments such as Nylon, Carbon Fiber-reinforced, or Rock PLA, it's better to upgrade to a hardened steel nozzle, as these materials can cause rapid wear on standard brass nozzle. A hardened steel nozzle will offer better resistance to abrasion, ensuring consistent print quality and prolonging the lifespan of your nozzle. 

🤝 Specification:

Recommended Extrusion/Nozzle Temp: 250°C - 270°C (4 82℉~518℉)

Heated Bed Temp: 25°C - 50°C (77 ℉~ 122℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.05

Filaments Net Weight: 1 kg (2.2 lbs)

Recommended Printing Conditions:

Cooling Fan: Off

Printing Speed: 30~50(mm/s)

Raft Separation Distance: 0.1~0.2(mm)

Retraction Distance: 3~6 mm

Packaging Included:

1 × spool of Nylon filament

User-Friendly Printing: Overture3D offers a hassle-free printing experience with its high-quality filament. Whether you're a beginner or an experienced user, our filament is designed to be easy to use, ensuring smooth and reliable printing every time.

Experience: Overture3D filament is designed to be compatible with a variety of 3D printers, making it convenient for any printing setup. The filament's consistent diameter and tolerance ensure smooth extrusion, allowing you to achieve precise and detailed prints effortlessly.

Glow in Dark Collection

In the dark, the printed matter will glow, and different colors will have different changes

• Easy going for new starters.Upgraded formular make the print is more easier and less print action needed. With consistency and pure quality,Easy PLA can be used on various mainsteam printers,give you less inconvenience and less? hassle.It's easy for new starters to print with basic settings.
• Less-tangle and Precision Winding .Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
• Dimensional Accuracy & Consistency .advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• Cost-effective and Wide Compatibility.With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
• LIFE-TIME GUARANTEE .No matter when or why you need to replace or refund we will help!Overture, are your reliable 3d filaments /accessories friends who provides high quality product and serivce when you need it .With over10 years R & D experience,innovation and production, being the best is our life-time goal.

Specification:

• Density : 1.16 - 1.25 (g/cm3 at 21.5˚C)
• Tensile strength (X-Y) : 46.6 ± 0.9 (MPa)
• Tensile strength (Z) : 43.5 ± 3.1 (MPa)
• Elongation at break (X-Y) : 1.9 ± 0.2 (%)
• Bending modulus : 3283 ± 132 (MPa)
• Bending strength : 85.1 ± 2.9 (MPa)
• Charpy impact strength : 2.7 ± 0.2 (kJ/m2)
• Young’s modulus (X-Y)：2636 ± 330 (MPa)

IMPORTANT REMINDER:

• We recommend using a 0.6mm nozzle if you experience clogging issues with Rock Textured Filaments. Rest assured, occurrences of this issue are becoming increasingly rare as we continue to enhance our product quality and refine the color masterbatch for the rock texture.
  
• When printing with abrasive filaments such as Nylon, Carbon Fiber-reinforced, or Rock PLA, it's better to upgrade to a hardened steel nozzle, as these materials can cause rapid wear on standard brass nozzle. A hardened steel nozzle will offer better resistance to abrasion, ensuring consistent print quality and prolonging the lifespan of your nozzle. 

• Easy going for new starters.Upgraded formular make the print is more easier and less print action needed. With consistency and pure quality,Easy PLA can be used on various mainsteam printers,give you less inconvenience and less? hassle.It's easy for new starters to print with basic settings.
• Less-tangle and Precision Winding .Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
• Dimensional Accuracy & Consistency .advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• Cost-effective and Wide Compatibility.With over 9 years'3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
• LIFE-TIME GUARANTEE .No matter when or why you need to replace or refund we will help!Overture, are your reliable 3d filaments /accessories friends who provides high quality product and serivce when you need it .With over10 years R & D experience,innovation and production, being the best is our life-time goal.

Specification:

• Density : 1.16 - 1.25 (g/cm3 at 21.5˚C)
• Tensile strength (X-Y) : 46.6 ± 0.9 (MPa)
• Tensile strength (Z) : 43.5 ± 3.1 (MPa)
• Elongation at break (X-Y) : 1.9 ± 0.2 (%)
• Bending modulus : 3283 ± 132 (MPa)
• Bending strength : 85.1 ± 2.9 (MPa)
• Charpy impact strength : 2.7 ± 0.2 (kJ/m2)
• Young’s modulus (X-Y)：2636 ± 330 (MPa)

IMPORTANT REMINDER:

• We recommend using a 0.6mm nozzle if you experience clogging issues with Rock Textured Filaments. Rest assured, occurrences of this issue are becoming increasingly rare as we continue to enhance our product quality and refine the color masterbatch for the rock texture.
  
• When printing with abrasive filaments such as Nylon, Carbon Fiber-reinforced, or Rock PLA, it's better to upgrade to a hardened steel nozzle, as these materials can cause rapid wear on standard brass nozzle. A hardened steel nozzle will offer better resistance to abrasion, ensuring consistent print quality and prolonging the lifespan of your nozzle. 

INTRODUCTION

• 【High-Grade Matte PLA】This newly launched filaments can output prints with shine-free color and frosted texture, which make it perfect for creation needing low-key, rich and enigmatic appearance;Grid layout on the surface for easy resizing
• 【Easy to Print & More Humanized Design】Easy to print just like normal PLA, more likely to get quality prints with sharp details. Excellent threshold overhang angle. Raft and support are very easy to remove; Reel with length/ weight gauge and viewing hole so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
• 【Odorless & No Bubble】Developed based on Natural PLA, this Matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing; Complete drying for 24 hours before vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free
• 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• 【Cost-effective and Wide Compatibility】With over 9 years' 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.

SPECIFICATIONS

• Density：1.32 ±0.1 (g/cm3 at 21.5˚C)
• Tensile strength (X-Y) ：20.90 ± 1.95 (MPa)
• Tensile strength (Z)：18.01 ±0.29 (%)
• Elongation at break (X-Y)：34.45 ± 8.06 (%)
• Bending modulus ：2694 ± 541.18 (MPa)
• Bending strength ：39.6 ± 1.1(MPa)
• Charpy impact strength：5.66 ± 0.44 (kJ/m2)
• Young’s modulus (X-Y) ：1882 ± 141.12 (MPa)

• Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374℉~ 428℉)
• Heated Bed Temp: 50°C - 70°C (122℉ ~ 158℉)
• Dimensional Accuracy 99% Probability +/- 0.03mm
• Dimensional Accuracy 98% Probability +/- 0.02mm
• Printing Speed: 30~70 mm/s (1800mm~4200 mm/min)
• Filaments Net Weight: 1 kg (2.2 lbs)

INTRODUCTION

• 【High-Grade Matte PLA】This newly launched filaments can output prints with shine-free color and frosted texture, which make it perfect for creation needing low-key, rich and enigmatic appearance;Grid layout on the surface for easy resizing
• 【Easy to Print & More Humanized Design】Easy to print just like normal PLA, more likely to get quality prints with sharp details. Excellent threshold overhang angle. Raft and support are very easy to remove; Reel with length/ weight gauge and viewing hole so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
• 【Odorless & No Bubble】Developed based on Natural PLA, this Matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing; Complete drying for 24 hours before vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free
• 【Dimensional Accuracy & Consistency】advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• 【Cost-effective and Wide Compatibility】With over 9 years' 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more